This qualification provides a trade outcome in carpentry, covering work in residential and commercial applications. The following occupations relate to this qualification. Carpenter - Carpenters construct, erect, install, finish and repair wooden and metal structures and fixtures used on the inside and outside of buildings, both for residential and commercial constructions. Carpenters may also work on building formwork. Roof tiler - Roof tilers cover structures with roof tiles, slates or shingles to form waterproof surfaces

CPCCCA2002B Use carpentry tools and equipment

Rob is able to identify, safely select and use carpentry tools and equipment. He can use hand tools, power tools, pneumatic tools, plant and equipment

CPCCCM2010B Work safely at heights

Rob is able to work safely on construction sites where the work activity involves working above 1.5 metres from ground level and where fall protection measures are required. He can identify work area requirements; access work area; and conduct work tasks

CPCCCA2011A Handle carpentry materials

Rob can safely manually handle, store and apply environmental management principles associated with carpentry materials and components. Rob is able to prepare material for mechanical handling

CPCCCA3001A Carry out general demolition of minor building structures

Rob is able to carry out general demolition work of minor building structures to facilitate alterations, extensions and additions to a building. He can also promptly complete his work as per the schedule, plans and specifications

CPCCCA3002A Carry out setting out

Rob is able to identify site boundaries and survey indicators. He can establish, measure and set up profiled set outs for buildings and structural components of building work. Rob is able to set out first line for building alignment; set out right angled corners; install other building lines and check that the lines are square

CPCCCA3023A Carry out levelling operations

Rob is able to conduct levelling procedures using the rise and fall method and the height of instrument method for the purpose of establishing correct and accurate set out of buildings, their components and preparation. He can set up, test and use levelling devices, undertaking closed traverses using a range of levelling equipment.. Rob can calculate distances using stadia lines

CPCCCM1012A Work effectively and sustainably in the construction industry

Rob is able to prepare for and sustain effective work within the construction industry. He can identify and clarify the construction industry work context, scope and employment conditions. Rob always accepts responsibility for his own workload; he works in a team, he can identify his own development needs; he can identify current resource use and opportunities to improve resource efficiency; and he can comply with environmental regulations

CPCCCM1013A Plan and organise work

Rob can plan and organise individual and group work activities on a construction site. He is able to identify task requirements, planning steps and organising work; and review planning and organising processes

CPCCCM1014A Conduct workplace communication

Rob is able to communicate effectively with other workers in a construction workplace environment. He can gather, convey and receive information through verbal and written forms of communication. Rob often carries out face-to-face routine communication and also participates in simple on-site meeting processes

CPCCCM1015A Carry out measurements and calculations

Rob is able to carry out measurements and perform simple calculations to determine task and material requirements for a job in a construction work environment. He can plan and prepare; obtain measurements; perform calculations; and estimate approximate quantities

CPCCCM2001A Read and interpret plans and specifications

Rob is able to read and interpret plans and specifications relevant to construction operations. He can identify different types of plans and drawings and their functions; recognise commonly used symbols and abbreviations; identify key features and specifications on a site plan; comprehend written job specifications; and recognise document statuses and amendment details

CPCCCM2002A Carry out excavation

Rob is able to undertake hand excavation tasks and excavations requiring the assistance of plant machinery to form excavations for footings, and the provision of services.He is able to undertake excavation to new and existing sites, and new services/the diversion of existing services. He can locate excavation sites and erect safety equipment

CPCCCM2007B Use explosive power tools

Rob is able to apply safe and effective operation of explosive power tools (EPT), used to fasten materials or fix fasteners to bases (including both direct action and indirect action explosive powered fastening tools)

CPCCCM2008B Erect and dismantle restricted height scaffolding

Rob can erect and dismantle restricted height scaffolding to provide work platforms for various occupational applications, including placement of safety barriers and only involves modular scaffolding restricted to a height of 4 metres. He can also inspect, repair and alter scaffolding

CPCCCO2013A Carry out concreting to simple forms

Rob is able to safely install formwork, reinforcement and place and finish concrete for the construction of minor slabs, pathways and other minor works to a specified design finish. He is also able to position the truck, place concrete from truck to work area, spread concrete and clean up the site

CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry

Rob is able to carry out OHS requirements through safe work practices at any on or off-site construction workplace.Rob can work in a safe manner through awareness of risks and work requirements. He always exercises safe work practices with concern for personal safety and the safety of others. Rob can follow emergency procedures

CPCCCA3003A Install flooring systems

Rob is able to plan, prepare, set out and install timber flooring systems to support imposed loads; including the application in brick veneer, full masonry and timber frame construction

CPCCCA3004A Construct wall frames

Rob is able to plan, prepare, set out, construct and erect load bearing and non-load bearing wall frames for the different types of loadings determined by the roof top and bracing configuration. He can set out, cut and fabricate both timber and metal wall frames. He can also erect, connect and brace wall frames to specifications

CPCCCA3005B Construct ceiling frames

Rob is able to plan, prepare, set out, construct and erect ceiling frames to accommodate ceiling joists, hanging beams, strutting beams and composite beams. He can also select members and set out the ceiling frame in conjunction with the roof members

CPCCCA3006B Erect roof trusses

Rob can select, set out, erect and brace roof trusses to accommodate roof coverings for waterproofing purposes (this include gable, hip and valley, and hip roofing types)

CPCCCA3007C Construct pitched roofs

Rob is able to select, set out, construct and erect pitched roofs to accommodate roof coverings for waterproofing purposes (this includes scotch valley gable, hip and valley, broken hip and valley and combinations thereof)

CPCCCA3008B Construct eaves

Rob can prepare, set out and construct eaves, including the cutting and fixing of fascias and barges to provide a finish between the wall and the roof (including boxed eaves and the finish to gable ends)

CPCCCA2003A Erect and dismantle formwork for footings and slabs on ground

Rob is able to erect and dismantle formwork to footings and slabs on ground; establish levels; and contain finished concrete. He can form basic slabs and form rebates to slabs on ground and steps to strip footings

CPCCCA3009B Construct advanced roofs

Rob is able to plan, prepare, set out and construct pitched roofs on irregular plan building shapes which may have skewed, splayed or hexagonal ends. He can work on such roofs that include dormer windows and may be of gable, hip, hip and valley, or combinations of these that are applied to different types and styles of buildings

CPCCCA3010A Install and replace windows and doors

Rob can plan, prepare, set out and install window and door units; he can replace window and door units to different types and styles of buildings for access, security, weather proofing and replacement of defective windows and doors. He is able to work on timber and metal window and door units

CPCCCA3012A Frame and fit wet area fixtures

Rob is able to install supporting framework for fixtures and flashings associated with the wet area construction for a bath, shower base and sink or basin unit, and preparation for wet area linings (this includes bathroom, laundry, shower, toilet and en suite wet areas)

CPCCCA3013A Install lining, panelling and moulding

Rob can prepare, set out and install lining and panelling to either masonry or timber/metal framed walls. He is able to install mouldings to provide decorative finishes

CPCCCA3016A Construct timber external stairs

Rob is able to construct and install timber external stairs, that may involve one or more flights, to provide access into a structure. His work includes timber treads and stringers

CPCCCA3017B Install exterior cladding

Rob is able to install material finishes applied to an external framed wall surface for the purpose of weatherproofing and securing the building. Rob is able to work with sheet material, weatherboarding of timber, plastic, metal and fibre cement sheet

CPCCSF2004A Place and fix reinforcement materials

Rob can place and fix reinforcement for concrete work as part of construction processes. He can plan and prepare for the work, including final preparation for placement, placing and fixing reinforcement, checking the reinforcement and completing clean-up activities